Techbanq
Industrial Operations

Summit Cement Energy Optimisation

A cement producer brings AI process control to two kilns and a finishing mill — cutting specific energy consumption and stabilising clinker quality at the same time.

Client
GCC-based cement producer, 3.8M tonnes annual capacity
Category
Industrial Operations
Engagement
9-month engagement
Services delivered
Operational intelligence, AI strategy & implementation
The Challenge

The challenge

The plant director had identified a measurable energy performance gap between day and night shifts — but the cause was not established, and no systematic approach to closing it existed. Cement is a process industry where small drifts in raw mix, kiln temperature, or mill feed translate directly into energy bills and clinker quality variation. The plant had a competent control room and a long-established operator culture. The question was whether that experience differential could be systematically narrowed without replacing the operator culture that made the plant run well.

What we found

Discovery

A two-month process audit identified the specific cause: the gap was almost entirely attributable to setpoint discipline during disturbance recovery. Night-shift operators responded to disturbances with the right intent but with setpoints that were slightly more conservative than the day-shift reference — losing 1.4% in energy efficiency during the recovery hour. The opportunity was not a new control philosophy or a change in operating approach. It was making the day-shift recovery technique consistently visible and available to every shift.

How we did it

Our approach

1

Process model design: trained a process advisor on three years of kiln and mill operating data, with the day-shift operating envelope as the reference for stable disturbance recovery

2

DCS integration: surfaced the advisor as a recommendation layer inside the existing DCS — every recommended setpoint includes the expected energy and quality impact, with the operator retaining the decision

3

Fuel optimisation programme: built a fuel mix optimiser that adjusts within the environmental permit envelope and updates on each fuel-quality measurement

4

Governance and cross-shift review: established a weekly cross-shift review where operators and process engineers review the advisor's recommendations and outcomes — building confidence in the system before increasing reliance on it

What we built

The Outcome

The engagement delivered a process advisor running alongside the existing DCS that surfaces setpoint and fuel-mix recommendations to the control-room operator. Every recommendation carries the expected impact, and the operator retains the decision. Cross-shift variance narrowed because every shift gained the same view of what the best-performing recovery technique looks like.

Measured Impact

The results

-6.4%
Reduction in specific energy consumption across both kilns
-1.9%
Reduction in clinker-quality standard deviation
$7.2M
Annual energy-cost saving at current fuel prices
9 mo
Time to payback at engagement close
“The advisor did not change our operators. It made the best of them available to all of them. That is what closed the gap between shifts.”
P
Plant Director
GCC Cement Producer
Technologies & PlatformsAI process advisor integrated with DCSFuel-mix optimiser within environmental permit envelopeCross-shift review and continuous evaluation pipeline
Next case studyFiberLink B2B Service AssuranceA telecom B2B division replaces a fragmented assurance estate with a single service-aware view — protecting SLA revenue and shortening the credit cycle.

Next step

Have a project like this?

We would love to hear what you are building. Let us explore how we can help.