Techbanq

Aviation · wayfinding

Indoor navigation is a map problem before it is a positioning problem

The blue dot gets the demo, but the passenger is failed by the map behind it: the gate renumbered last month, the corridor closed by hoarding, the lift the route never mentions. A terminal that maintains its map and designs routes for every traveller outperforms one that bought better positioning and let the building drift away from it.

Serving Saudi Arabia from our Riyadh office and our engineering hubs in Lahore and Karachi

Freight containers stacked at a shipping terminal

Enterprise delivery credentials

  • ISO

    ISO/IEC 27001

    ISO/IEC 27001 certified

Certifications & registrations

The options

Four honest ways to locate a passenger inside a terminal

Every category below works somewhere and disappoints somewhere. What decides between them is your building — its ceilings, its metal, its churn — which is why accuracy promises made before a site survey are marketing, not engineering.

OptionHow it locates the passengerWhat its accuracy honestly depends onWhat it costs to keep workingBest for
Radio beacons (Bluetooth or Wi-Fi)Fixed transmitters through the building; the phone estimates position from signal strength.Beacon density, interference from crowds and metal, and calibration. Expect zone-level confidence in open halls, weaker behind structure.Batteries, replacements and recalibration after every fit-out — a hardware estate with a maintenance roster.Terminals ready to own a physical estate for room-level guidance.
Phone sensor fusionThe phone dead-reckons from its own motion sensors between known fix points, no installed hardware.The quality of fix points and how far the walk drifts between them; long featureless corridors are its weak ground.Little hardware, but continuous software tuning per device generation and per building.Operators avoiding installed infrastructure and accepting drift between anchors.
Visual and QR anchorsThe passenger scans a marker or the camera recognises a mapped scene; position is exact at that instant, then inferred.Marker placement and the passenger’s willingness to scan; precise where scanned, blind everywhere between.Cheap to install, but every relocated sign or refreshed interior invalidates anchors until someone updates them.Targeted moments — “start my route here” at kerbs, junctions and gates.
Search-first maps, no positioningThe passenger picks where they are and where they are going; the map draws the route with no live dot.Nothing — it cannot be wrong about a position it never claims. Its risk is entirely in the map’s currency.Only the map itself, which every other option needs anyway.Any terminal as the first release — and the fallback every richer option should degrade to.

The unglamorous core

The terminal map is a living dataset somebody must own

A terminal changes constantly: a gate is renumbered, a retailer moves, a hoarding closes a walkway for a month, a security lane opens at peak and shuts after. None of these appears in the wayfinding system by itself. The unglamorous core of the whole capability is a workflow — who is told when the building changes, who edits the map, who verifies the route still works, and how fast the correction reaches the passenger’s phone. A wayfinding programme that budgets for launch and not for this workflow has bought a photograph of the terminal, and photographs age.

The practical answer is to treat the map like operational data rather than marketing collateral: one authoritative source feeding the app, the kiosks and the printed guides alike; edit rights held by a named team close to terminal operations; and every planned works order carrying a map task the way it carries a cleaning task. Where the operator already runs a maintenance or works-management system, the map workflow hangs off it rather than inventing a parallel process nobody remembers to use.

For every traveller

What wayfinding owes travellers the blue dot was not designed for

Routing for the median passenger is the easy half. These are the requirements that decide whether the system serves the wheelchair user, the family with a pushchair, and the traveller who reads Arabic — and what meeting each one produces.

Step-free routing as a first-class option

Lifts, ramps and their outages modelled in the map data, so a broken lift reroutes the journey instead of stranding it.

What the passenger gets: A route that works for wheels the first time, not after a dead end.

Walking times told honestly per traveller

Time estimates carry profiles — brisk, with children, step-free — rather than one athletic default that makes late passengers later.

What the passenger gets: A “leave now” moment the passenger can actually trust.

The app and the signs speak the same words

One bilingual terminology register — every zone, gate and landmark named identically in Arabic and English across app, kiosk and overhead sign.

What the passenger gets: A phone that says “Hall C” while the ceiling says “Hall C”, in both languages.

Guidance that works without looking at a screen

Screen-reader-tested routes, landmark-based instructions and haptic cues, verified with assistive technology users rather than assumed from a checklist.

What the passenger gets: A journey a blind traveller completes with the same independence as anyone.

The limit

Where a fixed sign still beats an indoor positioning system

Some moments in a terminal are wrong for a phone. A passenger stepping off a moving walkway into a fork of corridors decides in two seconds from a sign overhead, not from an app they would have to unlock. Emergency egress must never depend on a charged battery or a working network. And a simple, permanently true instruction — baggage reclaim this way — costs less as painted metal than as maintained software. The honest wayfinding programme is a mix: static signage for the decisions everyone makes at speed, digital routing for the journeys that are personal — a specific gate, a step-free path, a prayer room from here — and the discipline to know which is which. Selling a terminal an app to fix what its signage does badly replaces a cheap failure with an expensive one.

Our role

What we build for terminal navigation and what operations must carry

  1. 01

    The approach chosen against your building

    We assess positioning options in your terminal with a site survey and a pilot corridor, and we recommend against installed hardware wherever search-first maps and anchors already meet the need.

  2. 02

    The map platform and its workflow

    We build the single map source feeding app, kiosk and print, and the editing workflow tied into your works process — because the platform is worthless the month the building outruns it.

  3. 03

    Routes proven with real travellers

    Accessibility and Arabic-first routing are tested in the building with the people they exist for — wheelchair users, screen-reader users, Arabic-speaking travellers — before any rollout is called done.

The signage estate, the works process and the team that owns the map day to day are the operator’s; we deliver the platform, the routing and the update workflow shaped so that owning them is a task on an existing roster, not a new department.

Common questions

What buyers ask

How precise does indoor positioning need to be for terminal wayfinding?+

Less than the brochures imply, and the honest unit is the decision, not the metre. A passenger needs to know which hall they are in, which fork to take and roughly how far the gate is — decisions that zone-level confidence serves well. Room-level precision matters for a handful of moments, such as distinguishing adjacent gates, and those moments can often be served by an anchor at the gate itself. What we advise against is buying infrastructure to chase a precision figure quoted in the abstract: accuracy in a real terminal is set by ceilings, crowds, metal and maintenance, which is why any claim made before a survey of your building should be read as an aspiration.

Who should maintain the terminal map after a wayfinding system goes live?+

A named team inside terminal operations, with the map task attached to the works process rather than to goodwill. The failure pattern is predictable: at launch the vendor’s project team keeps the map current, the project closes, and within a year the map describes a terminal that no longer exists. The durable arrangement gives edit rights to people who already know when the building changes — the team that approves hoardings, gate changes and retail fit-outs — and makes the map update a line item on every works order. Vendors can host and support the platform; currency of the data has to live with whoever controls the building.

Will digital wayfinding let an airport reduce its physical signage?+

Treat that as a hope, not a business case. Digital routing serves the personal journey — this passenger, this gate, this step-free need — while overhead signage serves the two-second decision every passenger makes at a junction, and the second job does not move onto phones: a meaningful share of travellers will not have the app, a battery, or a hand free. Safety and egress signage is regulated and stays regardless. Where digital genuinely earns savings is in reducing churn on temporary and correctional signage — the printed arrows taped up after every change — because a current map answers the questions those signs were patching. Plan signage and digital as one system with two jobs, and let neither carry the other’s.

Test a route with us

A wayfinding review that walks three real routes through your terminal — one rushed, one step-free, one in Arabic — and scores where each breaks today.

Start the conversation